Our Product :
VERTICAL TEST BENCHES
VTS SERIES
- Vertical test bench with valve fixing system through screw or hydraulic cylinder
- Valve range under pressure testing from 1/2" to 120"
- Maximum reaction force up to 3000 tons
- Test according to API, ANSI, DIN, BS, ISO, EN
- Hydraulic pressure test up to 4000 bars
- Gas pressure test up to 2100 bars
- Cavity line (3rd injection line)
- Analogical or electronic leakage measuring systems
- Actuator torque detection up to 150.000 Nm
- Mobile valve support for easier loading/unloading operations
- ATEX conformity (optional)
For test bench with a face-to-face clamping system by hydraulic cylinder, the pushing force is regulated proportional to prevent any compression that may be damaging to the valve body.
HORIZONTAL TEST BENCHES
HTS SERIES
- horizontal test benches with one or two screws, in symmetrical or inclined (30° or 45°) position
- testing valve size from 1/2" to 84"
- maximum reaction force up to 5000 tons
- test according to API, ANSI, DIN, BS, ISO, EN
- hydraulic pressure test up to 4000 bars
- Gas test pressure up to 2100 bars
- Vacuum system
- Cavity line
- Single or double valve support/jack
- Analogical or electronic leakage measuring systems
- ATEX conformity (optional)
TILTING TEST BENCHES
TTS SERIES
This series of test benches are able to test the valve in horizontal, vertical or inclined (tilting) position to simulate the real valve at work.
In horizontal position it’s easier to place the valve into the test bench and it’s also possible to assemble some auxiliaries such as bellows, actuators, steering and so on.
MULTI STATIONS TEST BENCHES
MTS SERIES
Test benches to test multiple valves vertically up to 5 valves at the same time.
- testing valve size from 1/2" to 12"
- maximum reaction force 400 tons on all stations
- able to differentiate individually the leakage for every test station
- test according to API, ANSI, DIN, BS, ISO, EN
ACTUATOR TEST BENCHES
ATS SERIES
Special test benches for valve actuator and spring insertion/testing.
- maximum torque control up to 2.000.000 Nm
- maximum angle control 100° or multi-turn
- both static and dynamic test
- both clockwise and anticlockwise rotation
SAFETY RELIEF VALVE TEST BENCHES
SVA SERIES
Test benches for safety "relief" valves.
Designed for testing and setting any type of safety and pilot operated valve according to API 526 and API 527.
SPECIAL BENCHES
STS SERIE
Special test benches made to customer specification or base on particular testing rules.
- "Hot oil" test up to 150 C°
- cryogenic tests up to - 196 C°
- fire test system
- test system for CV calculation
CONTAINERIZED VALVE TESTING EQUIPMENT
- 20" or 40" container equipped with valve test bench(es)
TUBES TEST BENCHES
SERIES STS
- Test benches for flexible tubes
- Burst test according to current regulations